7. How to Replace an Old Vanity with a NEW Pedestal Sink

The fixtures and fittings are a vital part of a bathroom makeover.

You don't want the look of your new bathroom spoiled by outdated fixtures do you? That is why it is important that you know how to replace an old vanity with a beautiful new pedestal sink to get your bathroom makeover off to a great start.

To begin, you must turn off the hot and cold water supply to the vanity sink. After the water is off, disconnect the supply lines, waste line, and remove the sink by either removing the entire counter top, or just removing the bowl from the counter top. With the sink removed, the vanity should be easier to un-screw from the wall and carefully removed without disrupting the existing plumbing.

With the vanity removed, the flooring may need to be patched/repaired as the pedestal sink will sit on the finished flooring. If the plumbing comes up from the floor, this will have to be addressed now by cutting out section of sheetrock and flooring if needed.

Re-plumb the water supply and drain connection in the wall and use the manufacturers' template to position the plumbing in the wall. Remember that the new water supply lines, shut off valves and drain will be exposed so using new valves with a finish ring to match room and a metal, (copper or stainless steel) drain instead of PVC will give it a professional finished look.

With the wall exposed this would be a good time to place the new sink on the pedestal to measure where to mount a 2x6 in between the studs to bolt the sink to later. After the plumbing is moved and the wall is repaired, place the sink into position on the pedestal to mark the mounting holes on the wall and the floor.

Discover More About "7. How to Replace an Old Vanity with a NEW Pedestal Sink"